COMPACT PORTABLE POWER / OEM & ODM
A compact metal-housed power platform for lighting, communications and selected electronics. The M10 combines 1004.8Wh LiFePO4 energy with 500W continuous pure sine wave AC output, a metal carrying handle and OEM/ODM options for your market.
Published reference: 230V version, 220–240V AC output, 50Hz / 60Hz adaptive according to AC input. Confirm the supplied configuration and outlet standard before sample approval.
500W CONTINUOUS AC
BIGPACK LARGE-CELL PLATFORM
Actual cell photos · Background removed
3.2V nominal cell voltage
Large-format prismatic LiFePO4
Built around large-format prismatic LiFePO4 cells rated at 3.2V / 314Ah, BigPack puts substantial stored energy at the center of the product. Its large-cell approach is designed for better capacity value in cost-conscious OEM/ODM household-backup programs.
M10 pairs 1004.8Wh of nominal battery energy with 500W continuous AC output. Prioritizing capacity for lighting, communications and other essential low-power loads gives buyers a value-focused alternative to selecting a higher-output platform they may not need.
Metal housing and integrated BMS remain part of the platform, with overcharge, over-discharge, overcurrent, short-circuit and temperature protection. Use the product within its documented operating limits.
3.2V / 314Ah is a cell-level specification, not the complete pack configuration or the AC output rating. No IP, IK, drop-height or crush-load rating is implied.
Energy and Output Are Different
Start with the equipment you actually need to power. M10 provides 500W continuous AC output, making load selection and simultaneous-use planning essential even though its battery stores over 1kWh of nominal energy.
Match continuous and starting demand to the supplied configuration. Request the model-specific surge specification instead of relying on an unverified peak figure.
Nominal battery energy
Continuous pure sine wave AC
Maximum published solar input
Provide each device, its rated demand, starting characteristics, operating schedule and required duration. Validate the intended equipment rather than assuming compatibility from the energy capacity.
USB-C is rated up to 36W, the two USB-A ports up to 18W each, and two DC5521 outputs at 12V / 3A. The combined DC/USB output limit is 36W, so individual port ratings cannot be added together.
HOME EMERGENCY BACKUP
Build household-backup programs for outage-prone communities across Africa, Asia and Latin America, and for civilian households in Ukraine. M10 pairs 1004.8Wh of stored energy with 500W continuous AC output: prioritize essential devices, not whole-home power.
More stored energy for your essential-load plan.
Not a higher appliance power limit.
EVERYDAY HOUSEHOLD ESSENTIALS
Keep a selected LED light, a phone charger and a low-power fan in your outage plan. M10’s 1004.8Wh battery gives you energy to allocate to these essentials, while the total AC load must stay within 500W.
Check the fan’s starting demand and each device’s adapter. Do not treat battery capacity as permission to connect higher-wattage appliances.
STAY CONNECTED AT HOME
Prioritize a compatible router, phone and laptop for communication, home study or light work during a power cut. Set a realistic schedule instead of running every device continuously.
M10’s combined DC/USB limit is 36W. Review AC adapter use separately. Local device power cannot guarantee that the internet or mobile network stays available.
WINTER OUTAGE PREPAREDNESS
For civilian household preparedness in Ukraine and other winter-outage settings, plan selected LED lighting, phone charging and a compatible radio. Allocate the battery to low-power essentials rather than room heating.
This is an indoor household illustration, not a deployment claim. Confirm the unit’s operating and charging temperature limits before winter use.
Application examples are starting points for review, not guaranteed device compatibility or customer case studies. Confirm destination-market voltage, outlet type, operating conditions and the supplied product configuration.
Know the Input Limits
Plan AC and solar inputs using the M10 limits, not the input ratings of larger iForway platforms. Confirm connectors and operating conditions before choosing cables or panels.
The published M10 AC charging power is up to 500W. Request the charge curve and test conditions before making full-charge-time claims; input power alone is not a measured charging duration.
The published MPPT input range is 12–60V DC, with 20A maximum current and 500W maximum input power. Provide panel Voc, Vmp, Isc and the planned series/parallel arrangement for review.
The published description supports simultaneous AC and PV charging. Confirm the total input cap, source priority and operating conditions; do not add the two separate maximum ratings to create an unsupported combined specification.
Backup With Defined Limits
The published M10 UPS transfer-time reference is 10ms. The inverter’s 500W continuous output rating does not by itself establish the maximum load in every UPS, bypass or pass-through mode.
Check interruption tolerance, backup-mode load, starting demand and the exact supplied version before connecting sensitive equipment. Medical, server and other critical applications require their own suitability assessment.
Published Configuration Reference
This table describes the published 230V version, not every possible OEM variant. Confirm the approved model-specific datasheet, operating mode, port limits and supplied configuration before procurement.
| Specification | Published reference |
|---|---|
| Model | iForway M10 |
| Battery Capacity | 1004.8Wh |
| Battery Chemistry | LiFePO4 |
| Rated AC Output | 500W, pure sine wave |
| Peak / Surge Output | Request model-specific rating, duration and test conditions |
| AC Output Voltage | 230V version; 220–240V AC output range |
| AC Output Frequency | 50Hz / 60Hz adaptive according to AC input; confirm operating mode |
| AC Charging Power | 500W max |
| Solar / DC Input | 12–60V DC; 20A max; 500W max; confirm connector and array compatibility |
| Solar Charge Controller | MPPT |
| Simultaneous AC + PV Charging | Supported in the published description; confirm total input limit and applicable conditions |
| USB-C Output | 1 × PD 36W max |
| USB-A Output | 2 × 18W max per port |
| DC Output | 2 × DC5521; 12V / 3A |
| Combined DC / USB Output | 36W max across DC and USB outputs; port ratings are not additive |
| UPS Transfer-Time Reference | 10ms; not a zero-interruption guarantee |
| UPS / Bypass Load Limits | Confirm the supplied configuration; do not infer from inverter rated output |
| Product Dimensions | 260 × 190 × 195mm |
| Net Weight | Approx. 9.8kg |
| Enclosure and Handles | Sheet metal; top-mounted metal carrying handle |
| Battery Protection | Overcharge, over-discharge, overcurrent, short circuit and temperature protection |
| Ingress / Impact Protection | No IP, IK, drop-height or crush-load rating claimed on this page |
| Standard OEM MOQ | 100 units |
Model-Matched Documentation
Tell us the destination market, requested configuration and documentation required by your customer or compliance team. Request the M10 datasheet, operating manual and applicable product-specific compliance and lithium-battery transport files.
Check model coverage, issuing or responsible party, document number, version and validity where applicable. A factory qualification or general standard logo does not prove that every product configuration is approved for every market.
Build for Your Brand and Market
Standard OEM MOQ starts at 100 units. Discuss logo, color and packaging first, then separate firmware, UI, connector or tooling changes into an engineering review.
For standard-platform projects, planning references are approximately 15 days for samples and 35–45 days for mass production after specification and commercial approval. Engineering changes, tooling, testing and material availability can change the schedule; the confirmed quotation and production plan govern.
A two-year warranty is offered for distributor orders, subject to agreed terms. Confirm coverage, the start date and service procedures before placing your order.
Define market and load: destination, AC requirements, connected equipment and estimated order quantity.
Review the configuration: branding, engineering scope, port limits and required documentation.
Approve the sample and terms: validate the agreed specification and commercial requirements.
Confirm production and delivery: agree on packaging, shipment documents and order schedule.
Choose the Right Platform
M10 offers 1004.8Wh energy, 500W continuous AC output and up to 500W solar input. M20 offers 2009.6Wh energy, 1200W continuous AC output and up to 600W solar input.
Compare energy, equipment demand, charging access, port sharing and handling requirements. Neither platform should be selected for high-inrush equipment solely on its battery capacity.
YOUR MARKET. YOUR CONFIGURATION.
Send your destination market, estimated order quantity, required AC configuration and equipment list. Include branding or engineering changes for a model-specific review.
BEFORE YOU SPECIFY
The M10 uses a 1004.8Wh LiFePO4 battery and delivers 500W continuous pure sine wave AC output. Battery energy describes stored energy; the output rating describes load capability.
The published solar input is 12–60V DC, 20A maximum and 500W maximum, with MPPT. Confirm the connector, panel Voc/Vmp/Isc, series/parallel arrangement and temperature conditions before connecting an array.
The published maximum AC charging power is 500W. This is an input rating, not a guaranteed full-charge time. Request the charge curve, starting and ending state of charge, temperature and applicable test conditions.
The published M10 description supports simultaneous AC and PV charging. Confirm the combined input limit, source priority and applicable operating conditions for the supplied version; do not add the separate maximum ratings to create an unverified total.
USB-C is rated up to 36W, the two USB-A ports up to 18W each, and two DC5521 outputs at 12V / 3A. The combined DC/USB output limit is 36W, so individual port ratings cannot be added together.
No zero-interruption promise is made here. The published M10 transfer-time reference is 10ms. Confirm equipment tolerance, starting load, UPS-mode limit and the supplied configuration; do not infer backup-mode capability solely from the 500W inverter rating.
Runtime depends on the connected load, duty cycle, conversion losses, standby consumption, temperature and battery condition. Provide the equipment list and required duration for a model-specific evaluation. No fixed operating time is guaranteed here.
This page does not promise an unverified peak duration, cycle count, service life or ingress rating. Request the model-specific datasheet, relevant test conditions and matching reports before using those claims in your own product material.
The published dimensions are 260 × 190 × 195mm and net weight is approx. 9.8kg. The top-mounted metal carrying handle supports carrying. Plan ventilation, handling and placement for the intended use.
This page describes the published 230V version with a 220–240V output range and 50Hz / 60Hz frequency adaptation according to AC input. Confirm outlet standard, operating mode and destination-market requirements before sample approval.
Standard OEM MOQ starts at 100 units. Discuss logo, color and packaging first. UI, firmware, connector and tooling changes require an engineering review, an agreed specification and confirmation in the quotation.
For standard-platform projects, planning references are approximately 15 days for samples and 35–45 days for production after specification and commercial approval. A two-year warranty is offered for distributor orders under agreed terms. The confirmed quotation, production plan and warranty agreement govern.
Request the M10 datasheet, user manual, applicable model-matched compliance files and lithium-battery transport documents for the supplied configuration and destination market. Check model coverage, issuing party, document number, version and validity where applicable; factory qualifications alone are not product-specific approval.
M10 combines 1004.8Wh energy, 500W continuous AC output and up to 500W solar input. M20 combines 2009.6Wh energy, 1200W continuous AC output and up to 600W solar input. Choose by load, duration, charging access and handling needs, not capacity alone.
Power Life Power Future
Professional outdoor energy storage manufacturer since 2006.
iForway
inquiry@iforway.com
+86 13828849396 (WhatsApp / Mobile)
Subscribe to get the 2026 product catalog, latest price list and new product releases.
iForway is the brand of 3A Technology Co., Ltd. — a Shenzhen-based OEM/ODM manufacturer of portable power stations, LiFePO4 batteries, hybrid solar inverters and foldable solar panels, founded in 2006. The iForway brand is operated by 3A Technology Co., Ltd.
© 2026 iForway (3A Technology Co., Ltd.). All Rights Reserved.
